Last updated: October 2026. Sony announced the FX5 on July 22, 2026 and shipped it on August 18. Prices below are the July 2026 launch figures.
Camera launches are mostly a production-side sport. A new body ships, the shooters argue about rolling shutter for a week, and the edit bay doesn’t notice until the footage shows up. The FX5 is worth noticing now, because the headline feature isn’t the sensor. It’s the codec, and the codec is about to land on your ingest drive.
TLDR
Sony announced the FX5 on July 22: a full-frame Cinema Line body that slots between the FX3 and FX6 at $4,899; the August 18 ship date slipped, and as of October 12 it is a pre-order with retailers listing mid-October availability. It’s the first FX camera with internal X-OCN RAW and the first with open gate recording. The two new compressed X-OCN flavors put 16-bit RAW in roughly the same storage footprint as the 10-bit XAVC S-I you’re cutting today. At launch, those new flavors opened in exactly one application, and it wasn’t your NLE. If an FX5 is headed for your pipeline, post needs a plan before the first card comes back.
The codec is the headline
The camera itself is a solid mid-line cinema body: a newly developed 16.6MP full-frame stacked sensor, the BIONZ XR2 processor with a dedicated AI unit, 15+ stops in S-Log3, three base ISOs (800, 4000, and 12800), 5-axis in-body stabilization, and a fan that keeps it recording through long takes. All good. None of it changes your job.
What changes your job: every FX body until now recorded XAVC internally, and getting RAW out of one meant strapping on an external recorder. The FX5 records X-OCN internally. That’s the same 16-bit scene-linear RAW family the VENICE 2 and Burano shoot, in a body under five grand. It comes in three flavors: X-OCN LT at 389 Mbps in 4K 24p, plus two brand-new compressed variants, C1 at roughly 289 Mbps and C2 at roughly 232 Mbps. (VENICE’s heavier XT and ST flavors are not on the menu, and those rates scale up with resolution and frame rate.)
X-OCN LT works out to about 175 GB per hour at 4K 24p. C2 lands around 104 GB per hour. For reference, the XAVC S-I All-Intra 4K 24p files an FX3 writes today run 240 Mbps, about 108 GB per hour. So the smallest 16-bit RAW flavor is slightly smaller than the 10-bit All-Intra codec you’re already cutting. For a decade, RAW was the thing you budgeted around; on this camera it’s just another recording mode.
And 16 bits of scene-linear data is the kind of latitude you feel in the grade. White balance and exposure index become adjustments you make in post instead of decisions locked on set, and the three base ISOs mean the files coming back from a dim location are worth grading in the first place.
Nothing opened C1 and C2 at launch
At launch, the two new compressed flavors, the ones with the small files, were readable in Sony’s RAW Viewer beta and nowhere else. Not Resolve, not Premiere, not Avid. Sony’s line was that NLE support “will follow,” with a complete format support table promised alongside launch and Catalyst Prepare 3.0 slated for August 2026 with metadata-based clip selection. Resolve and Premiere already read the existing X-OCN flavors from VENICE and Burano, so LT is the safer bet until your seat reads C1 and C2.
The working rule is the same one I use for .0 software releases: don’t build a paying job on C1 or C2 until the seat that has to grade it reads the files natively. If a shooter tells you they’re bringing an FX5 before that day comes, have them shoot LT or XAVC S-I, and run a card through your actual pipeline before the schedule depends on it.
The Type A tax
X-OCN recording requires VPG400-certified CFexpress Type A cards. The FX5 has two slots that also accept SD, but SD won’t sustain RAW, so the cards are part of the real price. A 160GB card holds about 55 minutes of LT or roughly 90 minutes of C2, so a documentary day means several of them. The one to buy is the Lexar Professional Gold 160GB, VPG400-rated at $190, because Sony suspended its own card production in spring 2026 and the CEA-G160T now runs $360 while remaining stock lasts. You’ll also want a reader that doesn’t bottleneck the offload. I covered the Type A vs Type B price gap and which readers to buy in the CFexpress guide; the short version is that Type A stays the most expensive media per gigabyte in common use, and this camera just gave it a new reason to exist.
What open gate does for delivery
The other first: open gate. The FX5 reads its full 3:2 sensor at 4992 x 3328, which means one capture yields a real 16:9 cut and a real 9:16 crop with pixels to spare. If you’re delivering the same interview to YouTube and Reels, that’s the end of the “shoot it twice or crop it soft” problem. Frame rates hold up too: 5K up to 60p in the 17:9 and 16:9 modes, 4K up to 120p, and 1080 at 240. Open gate itself tops out at 30p, and a promised firmware update later adds 10x X-OCN slow motion in 4K.
Two caveats before you build a workflow on it. Open gate records only in X-OCN until firmware v2.0, which Sony has penciled for August 2027, adds XAVC S-I there. And if you deliver horizontal only, open gate is storage spent on rows of pixels above and below the frame you’ll ship. It’s a tool for multi-aspect delivery, not a default.
Who it’s for, and who keeps their FX3
Sony is explicit that this sits between the FX3 and FX6, and the gaps are deliberate. For the two bodies below it, Sony FX3 vs FX30 covers what the choice costs in post. There’s no built-in ND and no SDI out; both stay FX6 territory, and the missing ND stings more on a camera this run-and-gun friendly. It also moves to the new NP-SA100 battery, 1.3 times the capacity of the FZ100, which means the spares from your FX3 kit don’t carry over. The optional XLR handle is the post win here: four channels of 32-bit float audio at up to 96kHz, which turns “the location sound clipped” from a re-shoot conversation into a gain adjustment.
So, verdicts. If your FX30 or FX3 work ships as XAVC to social and doc clients, stay put; nothing about your delivery gets better for $4,899. If you’ve been renting an FX6 or Burano when a job needs serious grade latitude, or your clients have started asking for RAW deliverables, this is the body to test. And as a B-cam on VENICE or Burano productions it’s the obvious pick, because matching X-OCN to X-OCN in the conform beats matching XAVC to X-OCN every single time. I keep a running breakdown of what each camera’s files cost you in post in the edit-ready camera guide, and the FX5 will join it once real footage is in the wild.
Availability
The FX5 shipped on August 18 at a $4,899 list price. At the announcement the body was $4,898 at Adorama, or $5,498 with the XLR handle. The viewfinder and timecode adapter are separate add-ons.
My advice for the post side hasn’t changed since launch: keep an eye on Sony’s format support table, and the day your NLE ships C1/C2 support, run a test card before your first real conform. The FX5 footage that shows up in your bay will be some of the most gradable material a sub-$5k camera has ever produced, as long as you can open it. If you’re weighing one of these against keeping your current body, drop a comment and I’ll talk it through with you.
